ADS 372046
Sensor M12 (3 wires).
Cylinder sensor collar D25.
Detector attachment.
Double cylinder sensor M8 (0.3 m cable).
Cylinder sensor collar D32.
Detector cylinder.
Sensor M12 (3 wires).
Press reducer.
Transfer/press engine.
X67 module (16 inputs/outputs) - M12.
X67 module (16 inputs) - M8.
X67 module (4 analog input +/-10V).
Module X67 16E M8 / 16S EV M16.
X67 module (8 outputs) - M12.
Flange.
Silencer.
Lug.
Fixation.
Cable SMC.
Flange.
Exhaust regulator with silencer.
Flow restrictor.
Compact cylinder D40 stroke 20 mm.
Pneumatic cylinder D25 race 60 mm.
Pneumatic cylinder D25 race 80 mm.
Compact cylinder D50 stroke 20 mm.
Pneumatic cylinder D32 stroke 25 mm.
Pneumatic cylinder D32 race 40 mm.
Pneumatic cylinder D63 race 30 mm.
Pilot for compact cylinder.
Cylinder D50 length 20 mm.
Compact cylinder D40 stroke 20 mm.
Cylinder stroke 25.
Pilot 24VCC for distributor.
ISO T1 bistable distributor.
ISO Base T1.
Distributor monostable ISO T1.
Regulator 0-10 bar - 1/4 + mano.
Spares pneumatic cylinder SMC.
Spares pneumatic cylinder SMC.
Spares pneumatic cylinder SMC.
Spares pneumatic cylinder SMC.
Spares pneumatic cylinder SMC.
O ring 44x5 - (NBR 70 sh).
Seal compensation cylinder D280.
Piston seal compensation 1XL.
Seal compensation cylinder D280.
Compensation piston seal.
2XLs compensation piston seal.
Compensation piston seal.
Compensation piston seal.
Stop ring D17.
Pin 10x30.
Cylindrical pin ground 8x50 - DIN 6325.
Goupille cylindrique rectifiée 16x50 - DIN 6325.
Goupille cylindrique 16x45 DIN 6325.
Connector RLK 133 (22x47).
Connector RLK 131 (22x47).
ADS 312030
Ball Bearing.
Ball Bearing.
Roller D24.
Smooth film.
Smooth bearing.
Smooth film iglidur.
Circlips for shaft D25.
Spring T2bis (18x27x100).
Circlips for shaft D17 - DIN 471.
Shock absorber.
Spring T2 (20x32x40).
Spring T2 (20x32x50).
Elastic spring D20 x D8.5 x 16.
ADS 313058
Belt 50 AT 10 LG 1100.
Belt AT10-20 (lg m).
ADS 313060
Belt 50 AT 10 Lg. 1600.
Belt.
Belt.
Belt.
Belt.
Plug (D14).
Rail + 1 Slider.
Rail LH45 LG.360 - 1 Sliders LH45BN.
Plug for rail LH45 (D20).
Rail LH45 LG.255 - 1 Slider.
Mold carrier.
Mold carrier 1XL.
Mold carrier 4L/LO/5M/6MO (Hot Fill).
Mold carrier 2XLs.
Mold carrier 4XLs.
Mold bottom hold - 1XL/2XL/s.
Mold bottom wedge - 4L / 4XLs.
Brace.
Adjustment stop.
Transmission bracket.
Column.
Cylinder extension.
Adjusting shim 2L-160.
Bib flange.
Bib bottom of mold.
Bib flange.
Bib bottom of mold.
Stainless steel threaded rod M8x70.
Stainless steel threaded rod M6x55.
Piston.
Lock guide.
Lock.
Transmission stirrup.
Belt trainer.
Belt strap.
Motor support.
Pulley.
Pulley axis.
Hub support.
Pulley.
Spacer carriage.
Piston.
Sliding lock.
Lock.
Sheath.
Column.
Transmission bar.
Stop ring.
Disc of amortissage.
Spring Guide.
Disc of amortissage.
Balancing spring guide.
Chape.
Pulley.
Wheel.
Belt claw.
Base flange.
Belt strap.
Pulley axis.
Support guide.
Wheel axis.
Brace.
Support.
Sliding lock.
Cylinder extension.
Plate mold bottom.
Adjustment foot.
Sheath.
Mold bottom plate.
Piston.
Lock guide.
Sliding lock.
Lock.
Spacer carriage.
Hub support.
Pulley axis.
Motor support.
Gear wheel support.
Wheel axis.
Pulley.
Pulley.
Brace.
Belt trainer.
Belt strap.
Transmission bracket.
Column.
Sheath.
Stop ring.
Washer.
Transmission plate.
Cylinder support.
Adjustment shaft.
Roller support.
Mold bottom plate.
Adjustment stop.
Gear wheel support.
Non-return valve.
Column.
Cale de fond de moule 2L-120.
Sensor support.
Piston.
Guide lock.
Cylinder support bracket.
Cylinder support plate.
Pulling.
Washer.
Cylinder support plate.
Piston.
Lock guide.
Spacer carriage.
Mold bottom plate.
Support transmission.
Support cylinder.
Column.
Brace.
Mold bottom plate.
Transmission bracket.
Brace.
Special fitting.
Special cap (CM450097).
Plate.
Support.
Axis.
Plaque isolante.
Male trainer.
Orientation column.
Brace.
Sleeve.
Lock guide.
Stirrup.
Plateau fond de moule.
Square.
Sensor support.